“Tormac Water Circulatory pumps are used to circulate hot / cold water with adequate pressure in HVAC systems. All parts & components have been uncompromisingly tested to ensure trouble free performance and safety operation. The motor is of 2 pole asynchronous and squirrel cage type and consists of canned rotor portion. All the rotating parts are in touch with pumped liquid and thus it acts as lubricant to rotor, shaft & thrust bearings. An air vent plug is provided in the rear-end. The centrifugal impeller is of radial & closed type with corrosion resistant curved blades. Impeller, shaft with rotor, thrust bearing pad and the intermediate rings are assembled as a single unit to avoid the misalignment of the bearings. The thrust bearing is designed to withstand high axial thrust load. The particular model of pumps are equipped with a rotary switch in the terminal box that can be used to control the speed in 3 different levels based on the requirement. For trouble free operation the temperature of the pumped liquid should not exceed the specified level, the minimum inlet pressure should be maintained (to avoid cavitations) and dry run must totally be avoided. As the motor is impedance protected and consequently short-circuit proof, no additional motor protection is required. The pump is provided with standard length of cable lead out with plug. These circulatory pumps are generally used in tandem with heating systems. “
In Stock
| Ambient Temperature | 40 C |
| Maximum humidity | 95% |
| Liquid temp. range | -5 C to +110 C |
| Max. Operating Pressure | 10bar |
| Voltage | Single phase 230V |
| Frequency | 50 Hz |
| Degree of Protection | IP 44 |
| Insulation Class | F |
| Mounting position | Horizontal |
| Connection type | Screw / Flange |
| Head | Single |
Tried and trusted. Highly efficient.Corrosion free parts for hygiene. Low wear and tear. Easy for installation & service. Multi speed control (3 Levels). Perfectly and aesthetically designed. Silent operation & reduced electrical energy consumption.
Tormac Esteem series submersible motors are ingeniously designed and developed employing latest engineering softwares, high-tech machinery & tools with the complement of cutting edge technology for hardwearing and maintenance free operations and to ensure relentless performance.
The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance systems used at every stage of production and flawless workmanship lead to sustained and consistent operation.
Tormac Esteem series motors are non rewindable type. The stator is wound with high quality enameled copper wire and the stator shell is filled diligently with epoxy resin. Allowing faster and greater dissipation the resin ensures longer motor life. The stator shell, housings shell & motor base are made of fabricated S.S 304/316 which prevents the motor from corrosion.
These motors are pre-filled with environmentally safe deionised water mixed with propylene glycol which acts as a lubricant & coolant. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes. All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard.
Tormac’s swimming pool pumps are developed with the combination of immense experience, cutting edge technology and integrated quality control system complying with internationally accepted standards. Tormac’s “ TSW” series swimming pool pumps are self-priming type inbuilt with pre filter basket for cleaning the pool water. The mechanical seals are made of graphite and alumina with close tolerance for perfect sealing systems and the dynamically balanced rotary parts ensure vibration and noise free operation. All the parts of both pumps and motors are made of high quality materials to enhance the life span and efficiency. All single phase pumps are equipped with thermal protector to protect the motor from adverse operating conditions.
STAINLESS STEEL SUBMERSIBLE PUMPS 10”, TS / TN – SERIES Tormac stainless steel submersible pumps are ingeniously designed and developed employing latest engineering software’s, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The complete stainless steel construction not only prevents the pumps from corrosion but also exceptionally increases the lifespan. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation.
All these submersible pumps are the multistage single suction centrifugal type, provided with integral check-valve and NEMA standard coupling. These pumps are available with fabricated impellers and diffusers made of AISI 304/316 and the shaft is made of AISI 304/431. The integral check valve prevents backflow and reduces the risk of water hammer which paves the way for trouble-free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.
Tormac offers a comprehensive range of A.C. Induction motors in standard and premium efficiency designs for wide range of applications. These motors are synchronous type with constant speed suitable for continuous duty operations. Stator is made of low watt loss steel laminations to deliver high efficiency. Dynamically balanced rotor and high quality bearings ensure vibration and noise free operations. The varnish impregnated windings are made of high-grade enameled copper wire. Shaft is made of high quality steel, precision ground of ample size for transmitting the rated horsepower. Construction of motor frames and usage of quality materials result in high performance and low temperature rise, thereby increasing the life cycle of the motor. High-grade cast iron / Die-cast Aluminum components machined with close tolerance and high quality, heavy duty bearings are used to ensure better efficiency and longer life. All three phase motors require adequate control systems with necessary protections. Motors are available with IE1(EFF-2), IE2(EFF-1), IE-3(Premium Efficiency) versions with B3, B5 & B14 mounting dimensions to cater various applications.
