+260 211243285

info@fc.websiteforlogistics.com

Submersible Motor Eco Series(E- Series) 4″

Submersible Motor Eco Series(E- Series) 4″

Categories: , Brand:

Quick description:

ENCAPSULATED RESIN FILLED

Tormac Esteem series submersible motors are ingeniously designed and developed employing latest engineering software’s, high-tech machinery & tools with the complement of cutting edge  technology for hardwearing and maintenance free operations and to ensure relentless performance.

The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance  systems used at every stage of production and flawless workmanship lead to sustained and consistent operation.

Tormac Esteem series motors are non rewindable type. The stator is wound with high quality enameled copper wire and the stator shell is filled diligently with epoxy resin. Allowing faster and greater dissipation the resin ensures longer motor life. The stator shell, housings shell & motor base are made of fabricated S.S 304/316 which prevents the motor from corrosion.

These motors are pre-filled with environmentally safe deionized water mixed with propylene glycol which acts as a lubricant & coolant. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes.  All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard.

Availability:

In Stock

Compare

Technical Data

Specifications Nominal Diameter     (4”)
Rated Output & Voltage 0.37kW to 1.1kW – 230V -1Ph, 2 wire 0.37kw to 2.2kW – 230V -1Ph, 3 wire With Thermal protector  (upto 0.75kW) 0.37 to 7.5 kW – 380-415V – 3Ph, DOL
Rated Speed 2900
Voltage Tolerance -15%    +6%
Protection IP 58
Rotation Sequence CCW        – 1Ph CW, CCW –  3Ph
Outer Diameter 98mm
Duty S1 (Continuous)
Linear flow 0.15m/sec
Liquid Temperature 38˚C max
Switching Frequency 20 Times/Hour
Thrust load 0.75 kW to 1.5kW – 3000N / 650 Ibs 2.2 to 7.5 kW – 6500 N / 1500 Ibs
Mounting Dimensions NEMA Standard
Starting Method Permanent Split Capacitor (PSC), Capacitor Start & Capacitor run (CSCR) Direct on Line (DOL)
Motor Lead out type 2 / 3 Wire replaceable leads
Class of Insulation B

Applications

  • Agriculture
  • Mining
  • Industries
  • Residential
  • Fire Fighting and Dewatering
  • Construction & Building Services

You May Also like

    Centrifugal Monoblock Pumps (TM Series)

    0 out of 5

    Tormac single stage centrifugal pumps are providing with axial suction port and radial discharge port. The pump has back pull-out design. State of the art machinery, most advanced pumping technology and expertise gained over the years and employed in the, manufacture of these pumps. Quality raw material, seals, ball bearings and dynamically balanced rotating components are used to ensure long life.

    Stainless Steel Submersible Pumps 10″ (TS/250 – Series-60Hz)

    0 out of 5

    STAINLESS STEEL SUBMERSIBLE PUMPS 10”, TS / TN – SERIES Tormac stainless steel submersible pumps are ingeniously designed and developed employing latest engineering software’s, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The complete stainless steel construction not only prevents the pumps from corrosion but also exceptionally increases the lifespan. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation.

    All these submersible pumps are the multistage single suction centrifugal type, provided with integral check-valve and NEMA standard coupling. These pumps are available with fabricated impellers and diffusers made of AISI 304/316 and the shaft is made of AISI 304/431. The integral check valve prevents backflow and reduces the risk of water hammer which paves the way for trouble-free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.

    Swimming Pool Pumps(TSW – SERIES)

    0 out of 5

    Tormac’s swimming pool pumps are developed with the combination of immense experience, cutting edge technology and integrated quality control system complying with internationally accepted standards. Tormac’s “ TSW” series swimming pool pumps are self-priming type inbuilt with pre filter basket for cleaning the pool water. The mechanical seals are made of graphite and alumina with close tolerance for perfect sealing systems and the dynamically balanced rotary parts ensure vibration and noise free operation. All the parts of both pumps and motors are made of high quality materials to enhance the life span and efficiency. All single phase pumps are equipped with thermal protector to protect the motor from adverse operating conditions.

    End Suction Centrifugal Pumps (TE Series)

    0 out of 5

    Tormac End suction pumps with volute casing DIN 16 DIN 2532/2533 single stage end suction with bearing housing, Dimension in accordance with DIN 24255. End suction pumps are single stage centrifugal, non-self-priming, volute pumps. These pumps feature horizontal shaft components with axial suction and impellers and radial discharge ports. Pumps volute chamber and impellers are carefully designed to give the best possible and suction lift characteristics. Most modern and highly sophisticated machinery and technology are employed in the manufacture of these pumps using quality raw material, dynamically balanced impellers, seal and bearings to ensure long life.

X