STAINLESS STEEL SUBMERSIBLE PUMPS 10”, TS / TN – SERIES Tormac stainless steel submersible pumps are ingeniously designed and developed employing latest engineering software’s, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The complete stainless steel construction not only prevents the pumps from corrosion but also exceptionally increases the lifespan. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation.
All these submersible pumps are the multistage single suction centrifugal type, provided with integral check-valve and NEMA standard coupling. These pumps are available with fabricated impellers and diffusers made of AISI 304/316 and the shaft is made of AISI 304/431. The integral check valve prevents backflow and reduces the risk of water hammer which paves the way for trouble-free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.
In Stock
| Pumped Liquids | |
| Non-aggressive, non explosive, pure, cold, Fresh water without abrasive particles having the following characteristics. | |
| pH | 6.5 to 8.5 |
| Turbidity | 50ppm silica scale(max.) |
| Viscosity | 1.75 x 106m²/sec (max.) |
| Hardness (Drinking Water) | 300 (max.) |
| Specific gravity | 1.004 (max.) |
| Allowable solids | 3000 ppm (max) |
| Chlorine ion density | 500 ppm (max.) |
| Permissible amount of sand | 50 g/ m³ (max.) |
| Temperature | 38°C (max.) NBR 90°C VITON |
| Power Range (kW) 1Ph | Power Range (HP) 3Ph | Speed In RPM | Flow Range gpm | Flow Range m³/h | Recommended Head (ft) | Recommended Head (m) | Deliver Size in inches |
| – | 15HP – 300HP | 3450 | 200 – 1400 | 45 – 300 | 25 – 1425 | 8 – 434 | 6 |
| M.O.C | Impeller | Diffuser | Valve Housing | Valve | Cable Guard | Coupling | Suction Interconnector |
| Type S & N | AISI 304 /316 / 904L | AISI 304 /316 / 904L | AISI 304 / 316 / 904L | AISI 304 / 316 / 904L | AISI 304 / 316 / 904L | AISI 329 | AISI 304 / 316 /904L |
Tormac Centrifugal pump’s volute chamber and impellers are carefully designed to give the best possible hydraulic and suction lift characteristics. All dimensions and performances are according to EN733- DIN 24255 standards. Most modern and highly sophisticated machinery and technology are employed in the manufacture of these pumps using quality raw material,dynamically balanced impellers, seals and ball bearings to ensure long life. Dynamically balanced rotor ensures vibration and noise free operation. Shaft is made of quality steel, precision ground of ample size for transmitting the rated Horse Power.
Tormac TH Horizontal Multistage Centrifugal pumps are specially designed to facilitate pressure boosting and are best suited for a wide range of applications. The vital components viz. impellers, diffusers, and shaft used in these pumps are made of corrosion resistance high quality Stainless Steel which ensure a smooth and trouble free performance helps to pump safe and hygienic drinking water system. The prime mover of this product is robust in construction and built with thermal overload protection (only in single phase motors). High quality mechanical seals are used to ensure less friction / power loss.
Tormac offers a comprehensive range of A.C. Induction motors in standard and premium efficiency designs for wide range of applications. These motors are synchronous type with constant speed suitable for continuous duty operations. Stator is made of low watt loss steel laminations to deliver high efficiency. Dynamically balanced rotor and high quality bearings ensure vibration and noise free operations. The varnish impregnated windings are made of high-grade enameled copper wire. Shaft is made of high quality steel, precision ground of ample size for transmitting the rated horsepower. Construction of motor frames and usage of quality materials result in high performance and low temperature rise, thereby increasing the life cycle of the motor. High-grade cast iron / Die-cast Aluminum components machined with close tolerance and high quality, heavy duty bearings are used to ensure better efficiency and longer life. All three phase motors require adequate control systems with necessary protections. Motors are available with IE1(EFF-2), IE2(EFF-1), IE-3(Premium Efficiency) versions with B3, B5 & B14 mounting dimensions to cater various applications.
Tormac cast iron submersible pumps are ingeniously designed and developed employing latest engineering softwares, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation. All these submersible pumps are multistage single suction centrifugal type and provided with integral check-valve and NEMA standard coupling. These pumps are available with impellers made of bronze, diffusers made up of cast iron and the shaft is made of AISI 410/431. The integral check valve prevents back flow, up thrust and reduces the risk of water hammer which paves the way for trouble free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.
